AGME special purpose machines for components inserting and rolling over
Equipamentos, Montagem, Prensas
AGME designs and manufactures special purpose machines for assembling parts by insertion and rolling over processes. In this assembly machine a yoke is inserted on a shaft and after that the shaft is rolled over by a riveting machine to retain the yoke.
The shaft is fed manually on the fixture and the yoke is placed on the shaft adjusting the position. Then the shaft is held by a pneumatic clamp and the insertion process is performed. The yoke is pressed on the shaft controlling the force and the course.
After this the preassembly goes forward on a pneumatic slide to the riveting station so the rolling over process can be done. Then the final assembly goes backwards to the parts unloading/loading station, the clamps open and the part is unloaded to a ramp with selection of OK and NOK parts. If the part is NOK due to a failure in any point of the process, the tooling will return to the operator, the clamp will open and the exit to the OK parts ramp will be cut.
This assembly machine is composed of an insertion/pressing station with an AGME mini hydraulic press MPH-1 and a MPH-5 hydraulic group, a rolling over station with an AGME riveting machine model RR-20 and an unloading station with a ramp with double tunnel for OK-NOK parts. This station has a selection device by door system which detects the wrong part by a Reflex system.
, Máquinas de formagem
, Máquinas de montagem automática
, Máquinas de rebitar
, Máquinas de rebitar hidráulicas
, Máquinas Especiais
, Máquinas para montagens especiais
, Prensas Hidráulicas
, Rebitadoras pneumáticas
, Tecnologias de montagem